BMXZD - P8136, POLYVINYL ALCOHOL AV MOL WT (SUPDAT)
- MSDS: BMXZD
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: P8136, POLYVINYL ALCOHOL AV MOL WT (SUPDAT)
- National Stock Number: 6810-00N028483
Product Identification
Product ID:P8136, POLYVINYL ALCOHOL AV MOL WT (SUPDAT)
MSDS Date:01/27/1992
FSC:6810
NIIN:00N028483
MSDS Number: BMXZD
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 800-325-3010
Cage: 0DK69
Contractor
Telephone: 314-771-5765
Cage: 0DK69
Ingredients
POLYVINYL ALCOHOL
CAS: 9002-89-5
RTECS: TR8100000
Fraction By Weight: NO
Hazards
LD50 LC50 Mixture:LD50:(ORAL RAT)>20 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. MAY CAUSE EYE IRRITATION. MAY CAUSE
SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:FLUSH WITH WATER. INHAL:REMOVE TO FRESH AIR.
INGEST:WASH OUT MOUTH WITH WATER PROVIDED PERSON IS CONSCIOUS. CALL
MD.
Fire Fighting
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL POWDER, OR
APPROPRIATE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:UNDER FIRE CONDITIONS, MATERIAL MAY
DECOMPOSE TO FORM FLAMMABLE AND/OR EXPLOSIVE MIXTURE IN AIR.
Accidental Release
Spill Release Procedures:WEAR RESPIRATOR, CHEMICAL SAFETY GOGGLES,
RUBBER BOOTS AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND
HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND
WASH SPILL SITE AFTER MATER IAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH EYES, SKIN AND
CLOTHING. KEEP TIGHTLY CLOSED. STORE IN A COOL DRY PLACE. DO NOT
BREATHE DUST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE
BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:30,000-70,000 (LALLS).
Chemical Properties
HCC:N1
Spec Gravity:1.269
Appearance and Odor:WHITE CRYSTALLINE POWDER.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2.
Disposal
Waste Disposal Methods:DISSOLVE OR MIX MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL LOCAL, STATE AND FEDERAL
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.